M Melbourne EV Charger Installation

Ev Charger Installation

EV Charger Site Assessment in Melbourne, VIC

A check of supply, switchboard, cable route and mounting so EV charger quotes compare fairly.

Understand what a site assessment checks

A site assessment is the visit that comes before a quote. The electrician confirms your supply type, whether the switchboard has room and capacity for a dedicated circuit, the cable route to the parking spot, and a solid wall or post for mounting. Those findings set the scope every quote should price.

Who gains most from an assessment first

People holding two or three quotes that read nothing alike, and owners who have not yet picked a charger, get the most from it. Knowing your supply and board capacity first means you choose a charger that suits the home rather than one the home has to be rebuilt around.

Why uneven quotes make a site check worth it

One quote may assume a short run beside the board while another allows for a board upgrade and a long run through the roof space. Neither is wrong; they priced different jobs. An assessment fixes the job description, so the differences left are price and product, not guesswork.

Cable route, mounting and heritage questions

The route is often the biggest variable: roof cavity, underfloor, external wall or a trench to a detached carport. Mounting needs a sturdy surface clear of car doors. In older suburbs a heritage overlay may limit visible equipment, and parking that takes water in heavy rain may call for a higher mount.

How quotes should line up after the assessment

A comparable quote names the charger model, the circuit and cable size, the route, any switchboard work, and the certificate of electrical safety the installing electrician must give you. Where the work is prescribed, an independent inspection is also needed before it is energised. Ask about anything missing.

Contact details that make the assessment quicker

You can request a quote here and a licensed and insured local contractor can follow up. Have your suburb ready, mark where the car sits overnight, and note any heritage overlay or wet parking area. If the switchboard is easy to reach, snap it with the door open.

EV Charger Site Assessment Services We Offer

✓Attached Garage or Carport

The charger sits on a wall of the house, so the route is usually through the roof cavity, underfloor or along an external wall.

✓Detached Garage or Rear Parking

A longer route that may need trenching or overhead cabling, so the run length and cable size are checked closely.

How it works

  1. 1

    Share the basics

    Note your suburb, where the car parks and which wall the switchboard is on. A switchboard photo helps if it is handy.

  2. 2

    On-site check

    The electrician confirms the supply, switchboard capacity, cable route and a sound mounting point, and notes any overlay or flooding concerns.

  3. 3

    Scope agreed

    The charger model, circuit, route and any switchboard work are set out in writing so you can compare prices on the same job.

  4. 4

    Install and certificate

    Installation time depends on the route and any board work found. Afterwards you receive a copy of the certificate of electrical safety, with an independent inspection first where the work is prescribed.

Melbourne EV Charger Installation — ev charger installation in Melbourne

Common questions

EV Charger Site Assessment — FAQs

Still have a question? Send it with your enquiry.

+ Why should a Melbourne home have a site assessment before an EV charger quote?
Because the price depends on things only a look at the home reveals. Supply type, switchboard capacity, cable route length and mounting surface all change the scope. Without those facts, a quote is an estimate built on assumptions, and two quotes may describe quite different jobs.
+ How does a long cable run from the switchboard push up the charger price?
A longer run needs more cable, often a heavier size, plus more labour to route it through roofs, walls or under floors. A charger beside the board is usually the simplest job, while a detached garage at the back of the block is usually the most involved.
+ What makes two EV charger quotes for the same house so far apart?
Usually they assume different jobs. One may leave out switchboard work, use a shorter route or price a basic unit, while another includes a board upgrade and a smart charger. Ask each to list the charger model, cable route, circuit and board work so you compare like for like.
+ Is council planning approval needed for a home EV charger in Melbourne?
It depends on your council and the overlays on your property, so check before work starts. A wall charger in a garage is mostly electrical work, but where a heritage or other overlay applies, visible equipment may draw council interest. Your council's planning team can confirm.
+ Can a heritage overlay change where my EV charger goes?
It can. On an overlay property, a charger and conduit on a street-facing wall may be treated differently from equipment inside a garage or on a rear wall. Raise the overlay at the site assessment so the route and position can be planned around it.

Planning ev charger installation work in Melbourne?

Tell us about the job and we will put you in touch with a licensed and insured local ev charger installation.